Send to friend
Print item
Listing #240
Buyer's protection
Act locally to avoid scam
Anonymous payment gateways are very unsafe
Cheques payments are not recommended

Additional information

Status: Used
Marketing Strategies: Leasing
Share by email Share on Facebook Share on Twitter Share on Google+ Share on LinkedIn Pin on Pinterest
TRUCK - Tandem Axle 6x6 Chassis w/ Sleeper
Tandem 6 x 6 International Chassis
Front Axle Rating: 20,000 lbs.
Rear Axle Rating: 46,000 lbs.
- Diesel Engine
- 400 HP
- Manual w/ Double Overdrive & Air Shift
- Includes Internal Lube Oil Pump
- 30" Sleeper Cabin
- Includes 425/65R22.5 Michelin XZL's Off Road Tires
CHASSIS ADDS:
Frame Modifications:
- Chassis frame shall be modified, as required, to accept the
Wireline body
- Any chassis frame mounted components shall be re-located
as required to provide clean Back of Cab for body installation
- HD rear tow eyes, integral to the rear step shall be provided
- Rear 18" Tailboard (Steel) with flip down rear step with
non-slip Grip Strut for crew safety to be installed
- Two (2) chain boxes with lids installed in the rear bumper,
one (1) on each side
- Back up alarm installed
- License Bracket and LED license light provided for rear license
plate
- H.D. Mud flaps installed behind the rear wheels
- Chassis electric horn control to be extended to the operator's
console
TRUCK BODY:
- All aluminum, custom extruded tandem axle body for Wireline
service with an open area for Draw works
- Body shall be constructed with a substantial extruded
aluminum sub frame, spring mounted on the chassis frame
rails, using full length insulating nylon blocks between sub
frame and the chassis steel frame rails
- Sealed external body storage compartments as shown on
conceptual drawing
- Compartment openings framed with custom channel extrusion
- Automotive hollow style door seal is utilized
- Compartment doors are "Flush Fit" design
- Heavy duty Stainless Steel hinges are used
- Gas springs shall be fitted to all large doors, to keep the
doors in open and closed position
- Locking, self latching stainless steel "D" ring latches are used
on exterior compartments
- Stainless steel paddle latches installed on interior
compartments, where applicable
-
All stainless steel hardware with insulators between dissimilar
metal surfaces to prevent corrosion
- All stainless steel fasteners in critical locations
Compartment Sizes:
Rear Access Doors:
- One (1) ear body side hinged access doors to provide an easy
access to the tool storage rack on passenger side.
- Complete with stainless steel hardware
Lubricator/Tool storage:
- Lubricator and tool storage c/w hinged checker plate access
door at the rear for storing four (4) 3" x 10 ft 5k rated
lubricators.
- The storage "V" channels shall be lined with polypropylene to
protect the lubricator threaded ends
- Air bag type retainer are provided at the door end of the
storage .
Tool string Storage Rack:
- Rear access storage rack for storing and transportation of
Slickline tools strings
- Two (2) rows of aluminum "V racks
- One (1) row to accommodate up to six (6) tools strings with
larger diameter 3-3/8"
- One (1) row to accommodate up to six (6) tools strings with a
smaller diameter 1-3/8"
Hydraulic Tank and Access:
- System Stainless steel Hydraulic Tank with fill and access
door, driver's side
Vise:
- Vise mounted on a steel slideout, Wilton 3.5" double jaw
- One Rigid Pipe Vice mounted in Roll-out Tray
Swedge Mounting Plate:
- Mounting plate for five (5) swedges. Collars supplied will be 3
-1/2", 3", 2-7/8", 2-3/8" and 2".
Tool Mounting Plate:
- Tool mounting plate with 18 - 3/4" & 16 - 5/8" collars
installed
Drawwworks Interior Storage Tray:
- Additional storage tray (Open), with rubber matting inlay,
installed within the drawworks area, top of the compartments,
driver's side.
Load cell mount:
- Cradle for hydraulic load cell shall be mounted on or near the
Hydraulic hose reel, allowing the cell to remain connected.
Air Outlet:
- Air outlet is provided
OPERATOR'S CABIN:
- Fully insulated cabin, 121" long, with painted aluminum
interior, integrated with the body shall be furnished, featuring:
- Three (3) layer insulated cabin floor for comfort of the
operator(s). (aluminum, plywood overlay, rubber tile covering)
- Side access door, with a HD door open device shall be
installed on the left hand side of the apparatus body.
Industrial quality locking door handle is utilized.
- Pull out/ flip down HD steps for cabin access, c/w outside
cover door.Grip strut is used in these steps for operator's
safety.
- Folding access handrail also provided
Seating:
- Std Fixed Captains swivel, fully adjustable operator's chair
with arm rests
- Jump seat w/storage under seat, driver's side of cabin beside
the main entry door
No comments added yet. Be first to leave comment!

    Add your comment

    Real name or Username
    Will not be published
    Review, feedback or question
    *
    This field is required
    Clear
    You must log in or register a new account in order to contact the advertiser.